TEMY PLUS P

temy_plus_p_new

TEMY PLUS P

TEMY PLUS is a steel hot-water stove-boiler for central heating with possibility to cook in the same time.
It is constructed and produced following the guidelines of the EN 12815.
Boiler chamber is entirely made of steel, while the door frames are made of cast-iron. Cooking plate frame is made of stainless steel as well as the oven of the boiler.

The upper door has a „firewindow effect“ (fireproof glass). The lower door has secondary air inlet for better combustion.

The flue opening can be on the upper side or on the back side of the boiler, so the customer can chose which one to use.

Hot-water volume inside the boiler is high (48 l) – the fact which guarantees functionality of the product as a central heating boiler. It has no insulation coating around, so the heat radiation is spreaded toward the ambience directly as well (around 1 KW). The heat radiation toward the oven is 2 KW and to the cooking plate is 2-3 KW. The rest is given to the central heating system.

TEMY PLUS P has the embedded automatic draught regulator provided.

Boiler can work only as a stove during the summer time (the grid to be set up on higher position inside the chamber, which is done easily and within a few minutes).

An embedded heat exchanger for thermal safety valve connection is provided.

Type TEMY PLUS P 25
Overall power 25 KW
Power transmitted to the central heating system 18 KW
Width (mm) 1130
Height (mm) 855
Length (mm) 670
Necessary draught (Pa) 15
Flow  / Return line (inch) 1“
Weight (kg) 282
Flue opening (mm) ø148
Water content 48 lit
Max working pressure 2,5 bar
Oven dimensions 350 x 230 x 405 mm