TOBY H 12-17-21


TOBY H 12-17-21

TOBY H kamins are aimed for residential buildings (up to 170 sm) and are to be placed inside the living area (not into separate boiler rooms unlike other TOBY B models. They have no additional insulation of the boiler chamber, and thus they distribute heat by air to the surrounding area.

This central heating kamin unit is produced according to EN 14785 norm and fulfills low emissions criteria prescribed by this norm. It also fulfills the requirements of several country low-level standards such as EKOSKLAD in Slovenia and German BimSchV Stufe 2:2015.

Circulation pump, expansion vessel, safety valve are all included and pre-mounted into the boiler. Boiler doors are made of cast iron with fireproof glass.

H model is completely adapted to burn wood pellet as a primary fuel, achieving maximum efficiency level (90% and more) and a very low exit temperature for flue gases (below 160 °C).

Ignition, start-up and turning-off are fully automatized. Combustion control is optimized using algorithms such as ‘modulation’ which automatically decreases pellet dose as the difference between desired and reached temperature is decreasing.

Pellets are fed to boiler via internal transporter screw inside the storage tank. From there pellets are fed over to heating chamber where they fall free to the designated melting area (the ‘actual’ embedded burner of the boiler). Storage and melting area are physically divided. There is a safety thermostat to prevent back-fire.

Maintenance and cleaning are reduced to a minimum compared to all solid fuel boilers – only once a week, if not less than that, with a premium quality pellet and proper use.

Type TOBY H 12 TOBY H 17 TOBY H 21
Overall power 13,5 kW 19,9 kW 21,7 kW
Power transmitted to the heating system 11 kW 17,6 kW 18 kW
Fuel consumption at min power Min 0,7 kg/h Min 0,9 kg/h Min 1,2 kg/h
Fuel consumption at max power Max 2,8 kg/h Max 3,9 kg/h Max 4,3 kg/h
Width (mm) 520 580 605
Height (mm) 1080 1080 1140
Length (mm) 800 820 935
Flue gas exit height (mm) 200 200 220
Flow / Return (inch) 1“ 1“ 1“
Weight (kg) 198 224 268
Fuel capacity (kg) 15kg 15kg 25kg
Flue gas opening (mm) ø80 ø80 ø80
Air inlet (mm) ø50 ø50 ø50
Boiler content 19lit 29lit 38lit
Flue gas exit temperature <160 ºC <160 ºC <160 ºC
Energy consumption during start-up 400W 400W 400W
Energy consumption during stable mode 100W 100W 100W
Electric network 220V 50 Hz 220V 50 Hz 220V 50 Hz
Boiler efficiency >90% >90% >90%

termomont prospekt pdf
Short leaflet presentation

termomont uputstvo za upotrebu pdf
Technical Manual