TOBY H
TOBY H is a residential space-heater with central heating produced according to EN 14785 norm and Ecodesign criteria 2015:1189.
Heat is distributed in two ways: direct radiation to the surrounding area plus central heating distribution from its water jacket.
Circulation pump, expansion vessel and a safety valve are pre-mounted. The door is made of cast iron.
What excells this product is the original rotating burner design (similar to B-Smart – this solution enlisted at European registry EUIPO).
Burner bottom part is made of cast-iron.
Ignition, start-up and turning-off are fully automatized. Combustion control is optimized using algorithms such as ‘modulation’ which automatically decreases pellet dose as the difference between desired and reached temperature is decreasing.
Pellets are fed to boiler via internal transporter screw inside the storage tank. From there, pellets are fed over to heating chamber where they fall free to the designated melting area (the ‘actual’ embedded burner of the boiler). Storage and melting area are physically divided. There is a safety thermostat to prevent back-fire.
By installing an additional wi-fi router, this boiler can be turned on-off remotely via internet. Boiler regulation supports connection with a room thermostat.
TOBY H comes with standard display.
The premium touch-screen display can be ordered separately or at additional cost.
| TYPE | TOBY H 15 | TOBY H 20 | TOBY H 24 |
|---|---|---|---|
| Nominal power | 14,3 kW | 20,6 kW | 23,8 kW |
| Total power | 4,3 kW - 14,3 kW | 6,3 kW - 20,6 kW | 7,3 kW - 23,8 kW |
| Power transmitted to the central heating system | 12,2 kW | 17,1 kW | 19,4 kW |
| Max power radiated to the surrounding area | 2,1 kW | 3,5 kW | 4,4 kW |
| Heating area (an estimate to be taken with reserve) | do 100 m² | do 125 m² | do 160 m² |
| Fuel consumption at min power | Min 0,9 kg/h | Min 1,5 kg/h | Min 1,7 kg/h |
| Fuel consumption at max power | Max 3,6 kg/h | Max 5,1 kg/h | Max 6,0 kg/h |
| Width (mm) | 520 | 580 | 605 |
| Height (mm) | 1155 | 1080 | 1140 |
| Lenght (mm) | 820 | 820 | 935 |
| Flue gas exit height (mm) | 200 | 200 | 220 |
| Flow / Return (inch) | 1“ | 1“ | 1“ |
| Weight (kg) | 230 | 260 | 291 |
| Pellet storage capacity | 20 kg | 22 kg | 25 kg |
| Flue gas opening (mm) | ø80 | ø80 | ø80 |
| Air inlet (mm) | ø50 | ø50 | ø50 |
| Necessary draught | 10,9 Pa | 13,3 Pa | 13,8 Pa |
| Maximum working pressure | 2,5 bar | 2,5 bar | 2,5 bar |
| Water volume (lit) | 19 lit | 29 lit | 38 lit |
| Flue gas exit temperature | <160 ºC | <160 ºC | <160 ºC |
| Energy consumption during start-up | 400 W | 400 W | 400 W |
| Energy consumption at steady-state | 100 W | 100 W | 100 W |
| Electrical network | 220V 50 Hz | 220V 50 Hz | 220V 50 Hz |
| Boiler efficiency | 89,8 % | 90,6 % | 91,2 % |
| CO emissions | 0,02 % | 0,02 % | 0,19 % |
- Technical data
-
TYPE TOBY H 15 TOBY H 20 TOBY H 24 Nominal power 14,3 kW 20,6 kW 23,8 kW Total power 4,3 kW - 14,3 kW 6,3 kW - 20,6 kW 7,3 kW - 23,8 kW Power transmitted to the central heating system 12,2 kW 17,1 kW 19,4 kW Max power radiated to the surrounding area 2,1 kW 3,5 kW 4,4 kW Heating area (an estimate to be taken with reserve) do 100 m² do 125 m² do 160 m² Fuel consumption at min power Min 0,9 kg/h Min 1,5 kg/h Min 1,7 kg/h Fuel consumption at max power Max 3,6 kg/h Max 5,1 kg/h Max 6,0 kg/h Width (mm) 520 580 605 Height (mm) 1155 1080 1140 Lenght (mm) 820 820 935 Flue gas exit height (mm) 200 200 220 Flow / Return (inch) 1“ 1“ 1“ Weight (kg) 230 260 291 Pellet storage capacity 20 kg 22 kg 25 kg Flue gas opening (mm) ø80 ø80 ø80 Air inlet (mm) ø50 ø50 ø50 Necessary draught 10,9 Pa 13,3 Pa 13,8 Pa Maximum working pressure 2,5 bar 2,5 bar 2,5 bar Water volume (lit) 19 lit 29 lit 38 lit Flue gas exit temperature <160 ºC <160 ºC <160 ºC Energy consumption during start-up 400 W 400 W 400 W Energy consumption at steady-state 100 W 100 W 100 W Electrical network 220V 50 Hz 220V 50 Hz 220V 50 Hz Boiler efficiency 89,8 % 90,6 % 91,2 % CO emissions 0,02 % 0,02 % 0,19 % - Download
